LegUp
This section is designed for the Hardware store/building supplies merchant who needs quick access to view our range of manufactured or imported range of products. If we dont have what you are looking for then please contact us for assistance.
LegUp
Getting sheet goods up onto the table saw can be dangerous and back breaking. The panel can easily slip in the process or accidentally bump into the blade causing the board to kick back at the operator. And the process of bending, twisting and lifting the panel can easily 'throw out' the back.
The LegUp™ Panel-Lift Table Saw Accessory eliminates all those possibilities by using leverage to get the panel up onto the saw table in a simple, controlled manner.
The LegUp is a powder-coated flat steel bar (or 'leg') which mounts quickly and easily to the edge of your table saw or to the fence rail. That 'leg' has a 'foot' or 'hook' at the bottom that sits just a couple of inches above the floor. The bottom of the vertical panel is placed onto the foot. The LegUp serves as a fulcrum with a sufficient portion of a panel rising above the pivot point to make it easy to rotate or 'flip' that panel onto the top of the saw table with the action and ease of a seesaw or teeter-totter.
Then, as the operator slides the panel towards the saw fence the LegUp drops down, returning to its vertical.
