Admixtures & Sealers

This section is designed for the Hardware store/building supplies merchant who needs quick access to view our range of manufactured or imported range of products. If we dont have what you are looking for then please contact us for assistance.

Admixtures and Sealers

Air Flex Product

 

Air Flex Product

Advantages

  • All types of sand
  • Excellent workability
  • Longer board life
  • User friendly
  • Non-toxic
  • Cost effective
  • Low dosage
  • Sturdy plastic container
  • Provides good bond strength

Uses

When using MASONS Air-Flex as a mortar additive no additional admixtures are required. The product performs well regardless of the cement and sand types used.

Drive Seal Product

 

Drive Seal Product

Advantages

  • Hard Film: When fully cured the finish is designed to resist scratching and the abrasive effect of car tyres.
  • UV Stability: Acrylic polymers have long term resistance to UV degradation although any organic pigment in the underlying colour will fade.
  • Clean-Ability: Treated areas are easy to maintain as the micro-pore structure of the concrete/paving has been sealed, minimising dirt pickup and retention.

Uses

Designed for vehicle traffic and domestic driveways, outdoor entertainment areas and commercial applications such as building forecourts and car parks. MASSONS Drive and Paving Seal may also be used on cobblestone, bluestone, concrete and imitation slate surfaces as well as other high traffic surfaces requiring protection.

Keying Agent Product

 


Keying Agent Product

Advantages

  • Can be used for new work or repair work
  • No surface chipping to obtain a bond
  • Will adhere to most sound surfaces
  • Resists trace acids and alkali
  • Faster application of screeds and renders
  • Not suitable when continual water

Uses

MASONS Keying Agent is used for bonding mortar, plaster, floor toppings and concrete and renders to brick, and concrete masonry without any need to hack the surface to obtain a bond. Can be used on new or old surfaces.

MASONS Keying Agent can also be added to the mixing water to improve resistance to trace acids and alkali, as well as reducing surface dusting.

Bond Product

 

Bond Product

Advantages

  • Provides excellent adhesion to concrete, masonry plaster, fibre-cement board and most surfaces
  • The specific formulation allows thin coatings to be applied in the application of floor toppings, concrete, mortar etc.
  • Greatly improves tensile compressive and flexural properties allowing thin section application of concrete, mortar, floor toppings, etc
  • Excellent bonding is achieved within hours of completion

Uses

For improving and bonding floor toppings, plasters and mortars, repairs of worn, damaged or spalled concrete, floor screeds and toppings and concrete repair systems. Ideal for use in outside applications subject to continual presence of water.

Masonry Plus Product

 


Masonry Plus Product

Advantages

  • Faster application
  • Reduces cracking
  • Increases bond strength
  • Easier working
  • Greater plasticity
  • Eliminates need for lime
  • Cleaner work, less droppings
  • Easier ruling off
  • Cuts costs - increases productivity
  • Reduces water absorption
  • Helps prevent efflorescence
  • Resists Freeze - thaw damage

Uses

A very active non-staining liquid which readily mixes with water to improve the workability and adhesion of cement mortar and plaster. Eliminates the need for hydrated lime, but can be used with lime if necessary. A great masonry aid for laying bricks, concrete blocks and stone. An important additive for solid plastering.

Plastaseal Product

 


Plastaseal Product

Uses

A very active non-staining liquid which readily mixes with water to improve the workability and adhesion of cement mortar and plaster. Eliminates the need for hydrated lime, but can be used with lime if necessary. A great masonry aid for laying bricks, concrete blocks and stone. An important additive for solid plastering.

Sealer Product

 


Sealer Product

Advantages

  • Does not alter the colour or visual appearance of the treated surface
  • The water repelling properties facilitate ease of cleaning and impart not-staining characteristics by hindering penetration of stain inducing materials
  • Imparts non-slip properties
  • Non-yellowing and UV resistant
  • Allows concrete to breath

Uses

MASONS Masonry Sealer, is formulated for optimum exterior performance and can be used on all mineral-based interior and exterior building products including concrete walls and driveways, plaster and mortar finishes, stone and marble floor and wall tiles and cement fibre boards. Designed for vertical application and also suitable for vehicle traffic.

Splash Dash Product

 


Splash Dash Product

Advantages

  • Easy to use
  • Durable and long lasting

Uses

Masons Splash & Dash will clean concrete, paving tiles, decks, and driveways of any winter mould and mildew.

Water Proof Product

 


Water Proof Product

Advantages

  • Easy to use
  • Durable and long lasting
  • Enhances the waterproofing properties of cement
  • Does not affect normal cement properties
  • 99% Waterproof

Uses

MASONS Waterproofing Agent will drastically reduce the transference of moisture through most cement mixes. May be used in any situation where a degree of waterproofing is required in concrete or mortar.

Clay Product

 


Clay Product

Advantages

  • Water based, solvent free and environmentally neutral
  • Does not effect slip co-efficient of pavers when correctly applied
  • Helps stabilise joint sand and retard weed growth
  • Cleans up with warm water and detergent

Uses

Clear, low sheen finish formulated for pavers, bricks, concrete paths, and floor tiles