EXTERIOR PLASTER SYSTEMS
PRODUCT GUIDE:
Masons Plastabrick has developed the following products for the New Zealand construction environment. For full application details refer to the technical information sheets and for design phone 0800 522 533 or 09 - 414 7551.
| CODE | DESCRIPTION |
| PBAD | Masons Plastabrick ADOBE - finish for exterior base or mesh coated surfaces |
| PB1mm | Masons Plastabrick SPONGE FINISH 1mm - A plastic trowel or sponge finish over all base or mesh coasted surfaces, minimum 1mm. Also suitable as a texture spray. |
| PBBC | Masons Plastabrick BASECOAT - A robust render suitable as a basecoat on Clay Brick, Concrete Block, or any porous masonry surface, 5-20mm. |
| PBMR20 | Masons Plastabrick MESHING RENDER - A general purpose adhesive render used as a basecoat over polystyrene and smooth surfaces such as precast and tiltslab or painted surfaces, minimum 5mm on polystyrene. |
| PBMRF | Masons Plastabrick MESHING RENDER FINE - A jointing compound used with rebated 7.5mm fibre cement sheets. Also used for skimming over tilt panel for a smooth finish. |
| PBLBC | Masons Plastabrick LIGHTWEIGHT BASECOAT - Used for filling and levelling masonry substrates. |
| PBSK | Masons Plastabrick SKIMMING RENDER - A 2 - 4 mm mesh coat render for use on AAC aerated concrete or as a straightening coat over PBMR20 |
| PBIP | Masons Plastabrick INSULATING PLASTER - An insulating plaster for block work and fibre cement sheets. |
| Exterior Substrates | Specify | Nominal thickness | Applications |
| Solution Basecoat | |||
| Masonry | PBBC or PBLBC plus finish coat | 5 - 20 mm | All masonry surfaces |
| PBBC ( 1 coat sponged ) | 5 - 20 mm | Landscape walls | |
| Lightweight Concrete | PBMR20 or PBSK plus finish coat ( + mesh if required) | 5 - 20 mm | All AAC surfaces eg: Enviro, Thermalite |
| PBBC plus finish coat | PBMR20 or PBSK plus finish coat ( + mesh if required) | 5 - 20 mm | All AAC surfaces eg: Enviro, Thermalite |
| Solution Meshing Render | |||
| Polystyrene, Block or Sheet | PBMR20 or PBSK fibreglass mesh plus finish coat | 5 - 12 mm | Polystyrene, superform type surfaces, sheet clad structures & decorative ESP |
| Precast Concrete / Painted surfaces eg: painted brick or block | PBMR20 or PBBC plus finish coat | 5 - 20 mm | Tilt slab, cast in situ concrete. Straightening to precast surfaces |
| Solution Bonding Render | |||
| Fibre Cement Sheet | PBMRF or PBMR20 bonding render ( with fibreglass mesh) plus finish coat | 5 - 12 mm | Direct bond to fibre cement sheets |
| Insulating Plaster | |||
| Masonry | PBIP plus finish coat | 10 - 40 mm | Breathable insulating plaster |
| Fibre Cement Sheet | PBIP plus finish coat | 10 - 40 mm | Breathable insulating plaster |
